According to the structure processing characteristics of the slide plate, a special positioning clamping tool is developed, which greatly saves the refueling time realizes the refueling time less than 10s.
The three-axis adopts ball screw with large lead servo motor to realize the moving speed of more than 10 m / min. The industrial robot uses the technology of frequency conversion stepless speed regulation to realize that the drilling diameter can cover 3-12mm.
Preparation before startup:
【1】Carefully check whether all parts of the drilling machine are complete.
【2】Whether the screw is loose.
【3】Whether the lubricating oil reaches the required level.
【4】Whether the control button is flexible reliable.
【5】Whether drill pipe drill bit are damaged.
【6】Whether the support frame is broken.
【7】Is the spray facility installed in place?
【1】When the drilling machine idles for 1 to 2 minutes, listen carefully for abnormal noises noises.
【2】Drill slowly at low speed.
【3】The drilling speed can be adjusted properly if there is no abnormal low speed gear there is no gangue in the coal seam
Renmin Avenue, Luoxing street, Jiashan County, Zhejiang Province