How to maintain pay attention when using Gantry robot? The following industrial robot manufacturers have listed the maintenance precautions of Gantry robot for you, hoping to use the Gantry robot more safely conveniently! First of all, we should understand a mistake. Although the manipulator of CNC machine tool can work for 24 hours, no matter what machine it is, it needs to rest. Therefore, if possible, try to connect it Continuous 24h Gantry robot to work. When working for more than 12 hours, properly rest the Gantry robot for more than one hour.
The maintenance methods are as follows:
1. Maintain parts
Parts are an important part of NC machine tool robot. The reason why parts of NC machine tool manipulator are severely worn in the use process is mainly caused by the problems in people's installation. In this way, the position of parts is problematic, the wear will become more serious in the use process. In order to avoid this situation, people install them We should pay more attention.
2. Correct use
People should operate industrial robots according to the relevant requirements, which can effectively avoid the occurrence of misoperation lead to equipment problems. The probability of failure is low, which can effectively ensure the normal use of the manipulator of CNC machine tools, so that the service life can also be extended.
3. Correct maintenance
The maintenance measures of the manipulator of CNC machine tools should be implemented in place in the process of use. Only the correct maintenance measures can prolong the service life.
4. Correct installation
The first is the correct installation of the Gantry robot. People should pay more attention to the installation of the manipulator of the numerical control machine tool. It is necessary to ensure that the installation of all parts is in place. It is necessary to know that the incorrect installation will only affect the aesthetics, but also cause the appearance of faults in the use process, greatly reduce the service life.
5. Use lubricating oil
In order to avoid the serious wear of the parts of the manipulator of CNC machine tools in the use process, it is necessary to add a proper amount of lubricating oil after a period of time. The use of lubricating oil can effectively avoid the friction between parts, has a good anti rust function, which can ensure that the use of parts is normal, so the equipment can be used safely.
In order to have a service life of more than 10 years, we need to pay attention to the maintenance of Gantry robot in our daily use. In ten years, we can save 50000 yuan every year, which can save 500000 yuan for the enterprise. Therefore, Gantry robot can save the production cost for the enterprise!
Renmin Avenue, Luoxing street, Jiashan County, Zhejiang Province